Zariff A. Chaudhury and Glenn S. Daehn, "Underwater Electric Spark Discharge
for Metal Forming : A Literature Review", ERC report, ERC/NSM-S-91-19,
The Ohio State University, Columbus, OH, 1991.
Glenn S. Daehn and Leonard Bluestone, "Electrohydraulic Forming of Heating
Ventilation and Air Conditioning Components", Final report to Ohio's Thomas
Edison Program, July 1992.
V. S. Balanethiram and Glenn S. Daehn, "Enhanced Formability of Interstitial
Free Iron at High Strain Rates", Scripta Metall. et Mater., Vol. 27, 1992,
pp. 1783-1788.
V. S. Balanethiram and Glenn S. Daehn, "High Strain Rate Blanking : A Literature
Review", Engineering Research Center Report, ERC/NSM-S-93-01, The Ohio
State University, Columbus, OH, 1993, pg. 17.
V. S. Balanethiram and Glenn S. Daehn, "Hyperplasticity : Increased Forming
Limits at High Workpiece Velocity", Scripta Metall. et Mater., Vol. 30,
1994, pp. 515-520.
V. S. Balanethiram, Xiaoyu Hu, Marina Altynova and Glenn S. Daehn, "High
Velocity Forming : Is it Time to Rediscover This Technology", Engineering
Research Center Report, ERC/NSM-S-94-15, The Ohio State University, Columbus,
OH, 1994, pp. 36-37.
V. S. Balanethiram, Xiaoyu Hu, Marina Altynova and Glenn S. Daehn, "Hyperplasticity
: Enhanced Formability at High Rates", Journal of Materials Processing
Technology, Vol. 45, 1994, pp. 595-600.
X. Hu, R. H. Wagoner, G. S. Daehn and S. Ghosh, "The Effect of Inertia
on Tensile Ductility", Metall. Trans. A, Vol. 25A, 1994, pp. 2723-2735.
G. S. Daehn, M. Altynova, V. S. Balanethiram, G. Fenton, M. Padmanabhan,
A. Tamhane, and E. Winnard, "High-Velocity Metal Forming - An Old Technology
Addresses New Problems", JOM, Vol. 7, July 1995, pp. 42-45.
Glenn S. Daehn, Venkata S. Balanethiram, Xiaoyu Hu, Marina Altynova and
Mahadevan Padmanabhan, "Hyperplastic Forming of Sheets - A Competitor to
Superplastic Forming?" in Superplasticity and Superplastic Forming, Amit
K. Ghosh and Thomas R. Bieler, eds., The Minerals, Metals & Materials
Society, 1995, pp. 11-16.
A. A. Tamhane, V. J. Vohnout, M. Padmanabhan, G. Fenton, V. S. Balanethriam,
M. Altynova, and G. S. Daehn, "Opportunities in the High Velocity Forming
of Sheet Metal", Submitted to The Metal Forming, 1996.
Amit A. Tamhane, Marina M. Altynova and Glenn S. Daehn, "Effect of Sample
Size on Ductility in Electromagnetic Ring Expansion", Scripta Metall. et
Mater., Vol. 34, No. 8, 1996, pp. 1345-1350.
Xiaoyu Hu and Glenn S. Daehn, "Effect of Velocity on Flow Localization
in Tension", Acta Mater., Vol. 44, No. 3, 1996, pp. 1021-1033.