Fontana Corrosion Center Staff

Fontana Corrosion Center 477 Watts Hall, 2041 College Rd, Columbus, OH 43210, Ph/Fax 614-292-9857, FCC@osu.edu

	3d surface profilometry of AA7075-T651 exposed 0.1M NaCl for 1 week (Mary Cavanaugh)
	Cr-free weld in stainless steel (Yeong Ho Kim)
	Selective grain attack and sharp fissures in AA7075-T6 (Tsai-Shang Huang)
	In situ x-ray radiograph of IGC in L direction of AA2024-T3. L growth direction, -580 mV SCE, 1 M NaCl (Xinyan (Cindy) Zhao)
	SEM image of hydrotalcite pigment synthesized in the laboratory (Sudhakar Mahajanam)
	SCC in-situ x-ray radiography approach with a modified ASTM G49 stressing jig and a novel electrochemical cell containing flowing electrolyte (Xiaodong Liu)
	Stir friction weld overview (cross section of 7075 T6 alloy): the central part represents the fine crystallized nugget
	Focused ion beam crosscut of an intermetallic particle showing dealloying
	A photomicrograph of a cross section of an AA2024-T3 sample from a foil penetration experiment, indicating selective intergranular attack.
	A sample of X70 pipeline steel after sulfide stress cracking in a modified TM0177-A experiment.
	An SEM image of the fracture surface of sensitized AA5083 which exhibited intergranular stress corrosion cracking in a constant extension rate test.
	An electrochemical microcell measurement.
	Dr. Eiji Akiyama checking setup before starting a photoelectrochemical experiment.
	A close up of the foil penetration setup.