Glenn S. Daehn, Professor

Department of Materials Science and Engineering
The Ohio State University, Columbus, OH

PUBLICATIONS - Sorted by Technical Area, June 2008

 High Velocity Forming and Its Application
“Hemmning of Aluminum Sheet Panels Using the Electromagnetic Forming Technology”, P. Jimbert et. al., Proceedings from IDDRG 2007, Győr, Hungary, May 21-23, (2007).
“Application of a Uniform Pressure Actuator for Electromagnetic Processing of Sheet Metal”, S. Golowin et. al., J. Mater. Eng. Perform., 16, pp. 455-460, (2007).
"Agile Sheet Metal Forming: Basic Concepts and the Role of Electromagnetic Metal Forming", G.S. Daehn, Proceedings from IDDRG 2007, Győr, Hungary, May 21-23, (2007).
"A Uniform Pressure Electromagnetic Actuator for Forming Flat Sheets", Manish Kamal and Glenn S. Daehn,  J of Manuf. Sci. and Eng., 129, pp. 369-379, (2007).
"Forming Limits for Electromagnetically Expanded Aluminum Alloy Tubes: Theory and Experiment", J. D. Thomas, M. Seth, G. S. Daehn, J. R. Bradley and N. Triantafylidis,  Acta Mater.,  55, pp. 2863-2873 (2007).
"Agile Manufacturing of a Micro-Embossed Case by a Two-Step Electromagnetic Forming Process", M. Kamal, J. Shang, V. Cheng, S. Hatkevich and G. S. Daehn,  J. Mater. Proc. Tech., 190, pp. 41-50, (2007).
“Straight Hemming of Aluminum Sheet Panels Using the Electromagnetic Forming Technology: First Approach”, P. Jimbert, I. Perez, I. Eguia, G.S. Daehn, Key Engineering Materials, 344 pp. 365-372, (2007).
"Development and Use of the Uniform Pressure Electromagnetic Actuator for Forming Sheet Metal over a Range of Length Scales” S. Golowin, M. Kamal, J. Shang, J. Portier, A. Din, J. Bradley, S. Hatkevich, G.S. Daehn,  Proceedings from TMS, Cincinnati, OH, October 16-20,  (2006).
“Replication of Microfeatures by Electromagnetic Launch and Impact” M. Kamal, V. Cheng, T.K. Sue, J. Shang and G.S. Daehn, Proceeding from International Conference on Micromanufacturing 2006, Urbana, IL September 13-15, accepted (2006).
“New approach for HSS Springback correction: Electromagnetic pulses”,  E. Iriondo, B. Gonzalez, M. Gutierrez, I. Eguia and  G.S. Daehn, Proceedings from the International Conference New Developments in Sheet Metal Forming, Stuttgart, Germany May 10-12,  accepted (2006).
“Efficiency Improvement and Analysis of Changes in Microstructures Associated to a Uniform Pressure Actuator”, P. Jimbert, I. Eguia, J.I. Fernandez, E. Silveira, I. Garuz, G.S. Daehn, Proceedings from 2nd Annual ICHSF 2006: Dortmund, Germany March 20-21, (2006).
“Design, Construction, and Applications of the Uniform Pressure Electromagnetic Actuator” Manish Kamal, Vincent Cheng, John Bradley, Steve Hatkevich, Glenn S. Daehn, Proceedings from 2nd Annual ICHSF 2006: Dortmund, Germany March 20-21, (2006).
“Electromagnetic and High Velocity Forming:  Opportunities for Reduced Cost and Extended Capability in Sheet Metal Forming” G.S. Daehn, E. Iriondo, M. Kamal, M. Seth and J. Shang, SME, (2006).
“Electromagnetic Springback Reshaping”, E. Iriondo, B. Gonzalez, M. Gutierrez, V. Vonhout, G. Daehn, B. Hayes, Proceedings from 2nd Annual ICHSF 2006: Dortmund, Germany March 20-21,  (2006).
"Effect of Aspect Ratio on High Velocity Formability of Aluminum Alloy" M. Seth and G.S. Daehn, TMS Trends in Materials and Manufacturing Technologies for Transportation Industries Symposium, Pittsburgh, PA, October (2005).
"Formability of Sheet Steel in High Velocity Impact” M. Seth, V.J. Vohnout and G.S. Daehn, J Mater. Proc. Tech., 168, 391-400, (2005).
“Experimental Study of Spingback Elimination Using Electromagnetic Forming” E. Iriondo, B. Gonzalez, I. Eguia, M. Gutiérrez, G. Daehn, Proceedings from the 2005 IDDRG: Conference, Besançon, France, June 20-22, 2005.
"Improved Crimp-joining of Aluminum Tubes onto Mandrels with Undulating Surfaces", I. Eguia, P. Zhang, G.S. Daehn, Proceedings from ICHSF 2004: pp. 161-170 Dortmund, Germany March 31-April 1, 2004.
"Improved Formability by Control of Strain Distribution in Sheet StampingUsing Electromagnetic Impulses", V.J. Vohnout, J. Shang, G.S. Daehn, Proceedings from ICHSF 2004: pp.  211-220, Dortmund, Germany, March 31-April 1, (2004).
"Joining by High-Velocity Deformation" P. Zhang, G.S. Daehn, Sheet Metal Welding Conference XI, Sterling Heights, MI, May 11-14, (2004).
“Analysis of the Electromagnetic Impulse Joining Processes With a Field Concentrator” P. Zhang,  S.Yushanov, G.S. Daehn, MATERIALS PROCESSING AND DESIGN: Modeling, Simulation and Applications - NUMIFORM 2004 - Proceedings of the 8th International Conference on Numerical Methods in Industrial Forming Processes. AIP Conference Proceedings, 712, pp. 1253-1258 (2004).
"High Velocity Metal Forming", G.S. Daehn, Chapter in forthcoming ASM Handbook, Volume 14, Forming and Forging, (2004).
 "Electromagnetically Assisted Sheet Forming: Enabling Difficult Shapes and Materials by Controlled Energy Distribution" G.S. Daehn, J. Shang and V.J. Vohnout in Energy Efficient Manufacturing Processes, Fourth MPMD International Symposium on Global Innovations, I. Anderson, T. Marechaux, and C. Cockrill, editors, TMS San Diego, pp. 117-128, (2003).
"Spot Impact Welding of Sheet Aluminum", A. Turner, P. Zhang, V.J. Vohnout and G.S. Daehn, Materials Science Forum Proceedings of the 8th International Conference ICAA8, Cambridge, UK, 2-5 July, 396-402,  P.J. Gregson and S. Harris, eds., pp. 1573-1578, (2002).
"Os Avanços Obitdos no Processo Electromagnetico", G. S. Daehn, V. J. Vohnout and L. DuBois, Máquianas e Metais, pp. 222-241, Agosto (2000).
"Hyperplastic Forming: Process Potential and Factors Affecting Formability", G. S. Daehn, V. J. Vohnout and S. Datta, in Superplasticity and Superplastic Forming, P.B. Berbon, M.Z. Berbon, T. Sakuma and T.G. Langdon, editors, Volume 601, pp. 247-253 (2000).
"Electromagnetically Assisted Stamping -- A vision of a Possible Future for Metal Forming, And Progress in Modeling Electromagnetic Sheet Metal Forming", G. S. Daehn, H. Panshikar, K.D. Crane and V. J. Vohnout, in Proceedings of NSF Division of Manufacturing and Industrial Innovation Annual Meeting, Vancouver, 1/2000.
"Improved Formability with Electromagnetic Forming: Fundamentals and a Practical Example", G. S. Daehn, V. J. Vohnout and L. DuBois, TMS Sheet Metal Forming Symposium, San Diego, February 1999.
"A Hybrid Quasi-Static-Dynamic Process for Increased Limiting Strains in the Forming of Large Sheet Aluminum Parts", V. J. Vohnout, G. S. Daehn and R. Shivpuri, in Advanced Technology of Plasticity, Proceedings of the 6th ICTP Conf., M. Geiger, Ed., pp. 1359-64 (1999).
"Modeling of Electromagnetically Formed Sheet Metal", G. K Fenton and G. S. Daehn, J. Mater. Proc. Tech. Volume: 75, Issue: 1-3, March 1, pp. 6-16, (1998).
"Impulsive Forming of Sheet Aluminum: Cost Effective Technology for Complex Component Manufacturing", Proceedings of Alumitech, Atlanta, GA, May 1997.
"Opportunities in the High Velocity Forming of Sheet Metal", A. A. Tamnane, V. J. Vohnout, M. Padmanabhan, G. Fenton, V. S. Balanethiram, M. Altynova and G. S. Daehn, Metal Forming, pp. 42-49, (1997).
"Effect of Sample Size on Ductility in Electromagnetic Ring Expansion", A. A. Tamhane, M. M. Altynova and G. S. Daehn, Scripta Metallurgica, 34, 1345-50 (1996).
"Effect of Velocity on Flow Localization in Tension", X. Hu and G. S. Daehn, Acta Mater., 44, 1021-33 (1996).
"High Velocity Metal Forming--An Old Technology Addresses New Problems", G. S. Daehn, M. Altynova, V. S. Balanethiram, G. Fenton, M. Padmanabhan, A. Tamhane and E. Winnard, JOM, pp. 42-45, (1995).
"Increased Ductility in High Velocity Electromagnetic Ring Expansion", M. M Altynova, X. Hu and G. S. Daehn, Metallurgical and Materials Transactions, 27A, 1837-44 (1996).
"Hyperplasticity - A Competitor to Superplastic Sheet Forming?" G. S. Daehn, X. Hu, V. S. Balanethiram, M. Altynova and M. Padmanbhan, in Superplasticity and Superplastic Forming, A. K. Ghosh and T. R. Bieler, eds., TMS, pp. 11-16, (1995).
"Hyperplasticity: Enhanced Formability at High Rates", V. S. Balanethiram, X. Hu, M. Altynova and G. S. Daehn, Journal of Materials Processing Technology, 45, 595-600 (1994).
"The Effect of Inertia on Tensile Ductility", X. Hu, R. H. Wagoner, G. S. Daehn and S. Ghosh" Metallurgical Transactions, 25A, 2723-35 (1994).
"Hyperplasticity-Increased Forming Limits at High Workpiece Velocities", V. S. Balanethiram and G. S. Daehn, Scripta Metallurgica, 31, 515-520 (1994).
"Comparison of Explicit and Implicit Finite Element Methods in the Quasistatic Simulation of Uniaxial Tension", X. Hu, R. H. Wagoner, G.S. Daehn and S. Ghosh, Communications in Numerical Methods in Engineering, 10, 993-1003 (1994).
"Enhanced Formability of Interstitial Free Iron at High Strain Rates", V. S. Balanethiram and G. S. Daehn, Scripta Metallurgica et Materialia, 27, 1783-89 (1992).


Co-Continuous Ceramic Composites:
“Co-continuous composites for high-temperature applications”, E. Del Rio, J. M. Nash, J.C. Williams, M. C. Breslin, G. S. Daehn, Mat Sci & Eng A, 463, pp. 115-121, (2007).
“Co-Continuous Composite Materials for Friction and Braking Applications” G.S. Daehn and M.C. Breslin, JOM, 58, pp. 87-91, (2006).
"Friction and wear behaviour of C4 Al2O3/Al composites under dry sliding conditions", L. Ceschini, G.S. Daehn, G.L. Garagnani, C. Martini,Wear 216, pp 229-38 (1998).
"Tribiological behaviour of Al-20%Si/Al2O3 high reinforcement content composites produced by a displacement reaction", L. Ceschini, M.C. Breslin, G.S. Dahen, G.L. Garagnani, G. Poli, Proceedings of ECCM-8 (European Conference on Composite Materials), Napoli, 3-6 giugno 1998, pp. 285.
"Microstructure and tribological properties of a co-continuous alumina/aluminum composite", L.Ceschini, G.S. Dahen, G.L.Garagnani, C.Martini, Proceedings of the "5th European Conference on Advanced Materials and Applications", Vol.3 - Surface Engineering and Functional Materials, Netherlands Society for Materials Science, Zwijndrecht, NL (1997) 319-322.
"Co-Continuous Composite Materials from Net-Shape Displacement Reactions", G. S. Daehn, in Frontiers of Engineering: Reports on Leading Edge Engineering from the 1996 NAE Symposium on Frontiers of Engineering, National Academy Press, pp. 91-94 (1997).
"Processing, Microstructure and Properties of an Al-Al2O3 Co-Continuous Ceramic Composite", in Processing and Fabrication of Advanced Materials IV, ed. T.S. Srivasan and J. J. Moore, TMS, pp. 225-33 (1996).
"Processing Microstructures and Properties of Co-Continuous Alumina-Aluminum Composites", M. C. Breslin, J. Ringnalda, L. Xu, M. Fuller, J. Seeger, G. S. Daehn, T. Otani and H. L. Fraser, Materials Science and Engineering A, A195, 113-119 (1995).
"Elastic and Plastic Behavior of a Co-Continuous Alumina-Aluminum Composite", G. S. Daehn, B. Starck, L. Xu, K. F. ElFishawy, J. Ringnalda and H. L. Fraser, Acta Mater., 44, 249-61 (1996).
"Alumina/Aluminum Co-Continuous Ceramic Composites Produced by Solid-Liquid Displacement Reactions: Processing Kinetics and Microstructures", M. C. Breslin, J. Ringnalda, J. Seeger, A. L. Marasco, G. S. Daehn and H. L. Fraser, Ceramic Engineering and Science Proceedings, 5, 4, p. 104-112 (1994). Winner of conference best paper award (of >200 papers).
"Microstructural Analysis of Plastically Deformed Co-Continuous Ceramic Composite Materials", J. Ringnalda, M. C. Breslin, B. Starck, J. Seeger, G. S. Daehn and H. L. Fraser in High Performance Composites: Commonality of Phenomena, eds. K. K. Chawla, P. K. Liaw, S. G. Fishman, TMS, Warrandale, PA (1994).
"Development of Co-Continuous Ceramic Composite Materials for Specific Applications", J. Ringnalda, M. C. Breslin, J. Seeger, D. LeJune, G. S. Daehn and H. L. Fraser, Proceedings SAE 1994 Annual Meeting.
"Development of Co-Continuous Ceramic Composites for Specific Applications", J. Ringnalda, M. C. Breslin, J. Seeger, D. LeJune, G. S. Daehn and H. L. Fraser, SAE Technical Paper Series #940850, SAE International Congress 1994.
"Effects of Transformation and Chemistry on the Microstructure and Properties of Co Continuous Ceramic Composite Materials", J. Seeger, M. C. Breslin, B. Commentz, A. L. Marasco, J. Ringnalda, G. S. Daehn and H. L. Fraser, in Composite Materials: Commonalty of Phenomenon, Proceedings of TMS Annual Meeting , eds. K. K. Chawla, P. K. Liaw and S. G. Fishman, TMS (1994).
"Applications of Co-Continuous Ceramic Composites for Automotive Components", M. C. Breslin, G. S. Daehn and H. L. Fraser, SAE Technical Paper 930184, International Congress, Detroit 1993.
"Transformation Kinetics and Properties of Co-Continuous Ceramic Composites", A. L. Marasco, J. Ringnalda, M. C. Breslin, G. S. Daehn and H. L. Fraser Proc. TMS 1993 conference.
"Co-Continuous Alumina-Aluminum Composites for Heat Sinks and Substrates", M. C. Breslin, G. S. Daehn and H. L. Fraser, in Low Thermal Expansion Alloys and Composites, J. J. Stephens and D. R. Frear Eds. TMS,  pp. 171-183, (1994).
Creep: 
“Grain boundary precipitate modification for improved intergranular corrosion resistance, K.A. Unocic, P. Kobe, M.J. Mills, G.S. Daehn, Aluminum Alloys 2006, 519-521, pp 327-332.
"A Model for Creep Based on Microstructural Length Scale Evolution" G.S. Daehn, H. Brehm, H. Lee, B.S. Lim, Mater Sci Eng A Struct Mater Prop Microstruct Process, 387-89, pp. 576-584, (2004).
"A Scaling Analysis of Recovery Creep",  G. S Daehn, H. Brehm and B-S Lim in Modeling the Performance of Engineering Structural Materials III, Proceedings of TMS Fall Meeting, eds. D.R. Lesuer, T.S. Srivatsan, and E.M. Taleff, pp. 371-382, (2002).
"Effect of Heating Rate on Superplastic Cavitation for 5083 Al-Mg-Mn Alloy" J.Y. Uan, M.J. Mills, P. Kobe, P.K. Smith and G.S. Daehn, submitted to Acta Mater., February 2002.
"A Framework for Modeling Creep in Pure Metals", H. Brehm and G. S. Daehn, Materials Transactions, A, 33, 363 -371, (2002).
A Model for Slip Creep Based on Sub-Structural Coarsening" H. Brehm and G.S. Daehn, Creep Deformation Fundamentals and Applications, R.S. Mishra, J.C. Earthman and S.V. Raj Eds. TMS, 2002 pp. 421-429.
"Primary Creep in Polycrystalline Alpha-Titanium: Coupled Observations and a Stochastic Cellular Automaton Model", N. Thirumalai, M.F. Savage, M. J. Mills and G. S. Daehn, Proceedings of the 9th International Conference on Creep and Fracture of Engineering Materials and Structures, J.D. Parker, Ed., Swansea, Wales, April 2001, p. 49-54.
"Modeling Thermally Activated Deformation with a Variety of Obstacles and its Application to Creep Transients", G. S. Daehn, Acta Mater. 49, 2017-2026 (2001).
"Primary Creep Transients due to Non-Uniform Obstacle Sizes", G. S. Daehn, Materials Sci & Engr. A, 319-321, 765-769, (2001).
"Phenomenological and Microstructural Analysis of Room Temperature Creep in Titanium Alloys", T. Neeraj, D-H Hou, G. S. Daehn and M. J. Mills, Acta Mater. 48, 1225-1238 (2000).
"A Model of Creep Based on Interacting Elements and its Application to the Primary Creep of Fully-Lamellar g-TiAl", Glenn S. Daehn, G. B. Viswanathan, Michael J. Mills and V. K. Vasudevan, In TMS Proceedings: Creep and Creep Resistant Materials for the 21st Century, R. Mishra, Ed., TMS, San Diego, Feb. 1999.
"Mechanisms of Primary Creep in a/b Titanium Alloys at Lower Temperatures", S. Suri, T. Neeraj, G. S. Daehn, D-H Hou, J. M. Scott, R. W. Hayes and M. J. Mills, Materials Science and Engineering A 234-236, pp. 996-999 (1997).
"Superplasticity and Interdiffusion in Laminated Composites based on Ultrahigh Carbon Steel", G. S. Daehn and O. D. Sherby, in Thermomechanical Processing and Mechanical Properties of Hypereutectoid Steels and Cast Irons, D. Lesuer and O. D. Sherby, Editors, TMS, (1997).
"Mechanisms of Creep in Titanium Alloys at Lower Temperatures", S. Suri, T. Neraj, G. S. Daehn, D. H. Hou, J. M. Scott, R. W. Hayes and M. J. Mills, in Creep and Fracture of Engineering Materials and Structures, J. C. Earthman and F. A. Mohamed, Editors, TMS, 119-29 (1997).
"Effect of Multiaxial Stress on Creep Damage of 316 Stainless Steel Weldments", Y.H. Hsiao, H. Zhang and G. S. Daehn, Metallurgical Transactions, 27, 891-900 (1996).
"Superplasticity of a Stainless Clad Ultrahigh Carbon Steel"; G. S. Daehn, D. W. Kum and O. D. Sherby, Metallurgical Transactions, 17A (1986) pp.2295-98.
Thermal Cycling and Strain Mismatch Effects in Composites:
“Effect of load redistribution in transient plastic flow” W Gan, P.H Zhang, R.H. Wagoner, G.S. Daehn, Met and Mat Trans A, 37A pp. 2097-2106 (2006).
“Transient plastic flow at nominally fixed structure due to load redistribution” W. Gan, P.H. Zhang, R.H. Wagoner, G.S. Daehn, Zeitschrift fur Metallkunde, 96, pp 572-577, (2005).
"Prediction of Limit Strains in Superplastic Materials" M.P. Miles,  G.S. Daehn and R.H. Wagoner, Metallurgical and Materials Transactions A, 34A, 2559-2564, (2003).
"Investigation of Yield Surface of Monolithic and Composite Powders by Explicit Finite Element Simulation", X.J. Xin, P. Jayaraman, G.S. Daehn and R.H. Wagoner, International Journal of Mechanical Sciences, 45, 707-723, (2003).
"Observations on the Denication of Al-Al2O3 Composite Powder by Pressure Cycling", G. Jiang, G. S. Daehn and R. H. Wagoner, Powder Metallurgy, 46, 78-82, (2003).
"Explicit Finite Element Method Simulation of Consolidation of Monolithic and Composite Powders", X.J. Xin, P. Jayaraman, G. Jiang, R.H. Wagoner and G.S. Daehn, Materials and Metallurgical Transactions, 33A, 2649-2658, (2002).
"Effect of Cyclic Compaction on the Uniformity of Metal Matrix Composites", Y. Fu, J. J. Lannutti, R. H. Wagoner and G. S. Daehn, Materials and Metallurgical Transactions, 33A, 183-191, (2002).
"Inclusion Particle Size Effects on the Cyclic Compaction of Powder Composites", G. Jiang, G. S. Daehn and R. H. Wagoner, Scripta Materialia, 44, 1117-1123, (2001).
"Effects of Lubrication and Aspect Ratio on the Consolidation of Metal Matrix Composites under Cyclic Pressure", G. Jiang, G. S. Daehn, J. J. Lannutti, Y. Fu and R. H. Wagoner, Acta Mater.,49 (8) 1471-1477 (2001).
"Void Filling and Cluster Breaking of Metal-Ceramic Composites Under Pressure Cycling", G. Jiang, G. S. Daehn and R. H. Wagoner, Scripta Mater.,44 287-292, (2001).
"Enhanced Densification of Metal Matrix Composites Under Cyclic Pressure", G. Jiang, Y. Fu, W. Wu, G. S. Daehn and R. H. Wagoner, Proceedings of PM2TEC, 2000.
"Experimental and Numerical Investigations of Idealized Solid State Consolidation", W. Wu, G. Jiang, R. H. Wagoner and G. S. Daehn, Acta Mater., 48 (17) 4323-4330, (2000).
"Experimental and Numerical Examination of Idealized Powder Compaction under Cyclic Pressure, G. Jiang, W. Wu, G. S. Daehn and R. H. Wagoner, Acta Mater.,48 (17) 4331-4335, (2000).
"Thermal Cycling and Related Strain Mismatch in Metal Matrix Composites", G. S. Daehn, Volume 3, Chapter 15 Comprehensive Composite Materials, edited by A. Kelly and C. Zweben, Elsevier, 419-445 (2000).
"A General Numerical Method to Solve for Dislocation Configurations, X. J. Xin, R. H. Wagoner and G. S. Daehn, Materials Transactions, 30A, 2073-2087 (1999).
"Finite Segment Method for Dislocation Mechanics", X. J. Xin, R. H. Wagoner and G. S. Daehn, Scripta Mater.,39, 397-407 (1998).
"Modeling the Generation Equilibrium and Emission of Dislocations at Misfitting Particles", X. J. Xin, G. S. Daehn and R. H. Wagoner, Acta. Mater., 46, 6131-44 (1998).
"Effect of Cyclic Pressure on the Low Temperature Consolidation of Several Composite Powder Systems", C-Y Huang and G. S. Daehn, Acta Mater.,45, 4283-96, (1997).
"Equilibrium Configuration of Coaxial Prismatic Dislocation Loops and Related Size-Dependent Plasticity", X. J. Xin, G. S. Daehn and R. H. Wagoner, Acta. Mater., 45, 1821-36 (1997).
"Thermal Cycling Creep of Metal Matrix Composites: Modeling With Continuum and Dislocation-Based Approaches", G. S. Daehn, X. J. Xin and R. H. Wagoner, in Creep and Fracture of Engineering Materials and Structures, J. C. Earthman and F. A. Mohamed, Editors, TMS, 257-66 (1997).
"Densification of Composite Powder Compacts in Pressure Cycling", C-Y Huang and G. S. Daehn, Acta Mater.,44, 1035-45 (1996).
"Modeling of Enhanced Composite Creep and Plastic Flow in Temperature Cycling", invited contribution to, Numerical Analysis and Modeling of Composite Materials, edited by J. W. Bull, Blackie Academic and Professional Publishing, pp. 327-55, 1996.
"An Approach to the Design of Composites for Service at Elevated and Non-Steady Temperatures", K. F. ElFishawy and G. S. Daehn, Metallurgical Transactions A, 26A, 3091-105 (1995).
"Improved Densification and Uniformity of Composite Powder Compacts Due to Pressure Cycling", C-Y Huang and G. S. Daehn, in Net Shape Processing of Powder Materials, (edited by S. Krishnaswami, R. M. McMeeking and J. R. L. Trasssorras), Vol. 216, p. 69, ASME, New York, NY (1995).
"Superplastic Forming of Metal Matrix Composites by Thermal and Pressure Cycling", C-Y Huang and G. S. Daehn, in Superplasticity and Superplastic Forming, A. K. Ghosh and T. R. Bieler, eds., TMS 1995, pp. 135-142.
"Analysis of Thermally Induced Stress and Strain in Continuous Fiber Reinforced Composites", H. Zhang, P. M. Anderson and G. S. Daehn, Metallurgical Transactions 25A, 415-425 (1994).
"Non-Isothermal Deformation Behavior of a High Performance Aluminum Matrix Composite", G. S. Daehn, K. Hebbar, Y-S Suh and H. Zhang, Composites Engineering, 3, 699-713 (1993).
"Yield of Continuous Fiber Composites Under Axisymmetric Loading", H. Zhang, S. Krishnaswami, P. M. Anderson and G. S. Daehn, Scripta Metallurgica, 29, 1477-84 (1993)
"Isothermal and Thermal Cycling Creep of an Al-40 Si Particle Reinforced Composite (CMSH A-40)", Y. C. Chen and G. S. Daehn, in Low Thermal Expansion Alloys and Composites, J. J. Stephens and D. R. Frear Eds. TMS, 1994. pp 185-193.
Hongyan Zhang, Glenn S. Daehn & R. H. Wagoner:  Finite Element Simulation of Thermal Cycling Deformation of Metal Matrix Composites, Numerical Methods in Industrial Forming Processes - NUMIFORM '92, eds. J.-L. Chenot, R. D. Wood, and O. C. Zienkiewicz, A.A. Balkema, Rotterdam, 1992, pp.199-205.
"Simulation of the Plastic Response of Whisker Reinforced Metal-Matrix Composites Under Thermal Cycling Conditions" H. Zhang, G. S. Daehn and R. H. Wagoner, Scripta Metallurgica, 25, (1991) 2279-84.
"Temperature Change Induced Plasticity in Metal Matrix Composites: Effect of Reinforcement Morphology", G. S. Daehn, P. M. Anderson and H. Zhang, Scripta Metallurgica, 25, (1991) 2285-90.
"The Deformation of an Aluminum-Silicon Eutectic Alloy Under Thermal Cycling Conditions", Y. C. Chen and G. S. Daehn, Metallurgical Transactions,22A, 1113 (1991).
"Approaches to Modeling the Plastic Deformation of Metal Matrix Composites Under Thermal Cycling Conditions", G. S. Daehn, H. Zhang, Y. C. Chen and R. H. Wagoner, Modeling the Deformation of Crystalline Solids, Physical Theory, Application and Experimental Comparisons, T. C. Lowe, P. Follansbee, T. Rollett, and G. S Daehn eds., TMS, 1991. pp. 665-678.
"Thermal Cycling Deformation of a Particle Reinforced Metal Matrix Composite: Comparison Between a Model and Experimental Observation", Scripta Met et Mat., 25, 1543-48 (1991).
"The Temperature-Cycling Deformation of Particle Reinforce Metal Matrix Composites -- A Finite Study", G. S. Daehn, H. Zhang, R. H. Wagoner, Scripta Metallurgica et Materialia, 24, 2151-2155 (1990).
"The Potential for Forming Metal Matrix Composites Via Thermal Cycling", Y. C. Chen, G. S. Daehn and R. H. Wagoner, Scripta Metallurgica et Materialia, 24, 2157-2162 (1990).
"Plastic Deformation of Continuous-Fiber Reinforced Composites Subjected to Changing Temperature", G. S. Daehn, Scripta Metallurgica, 23, pp. 247-252 (1989).
"Effects of Environmental and Microstructrural Variables on the Plastic Deformation of Metal Matrix Composites Under Changing Temperature Conditions", G. S. Daehn, Proceedings -- ASTM Symposium on Thermal and Mechanical Behavior of Ceramic and Metal Matrix Composites, pp. 70-86, Atlanta, (1988).
"Deformation of Whisker-Reinforced Metal-Matrix Composites under Changing Temperature Conditions", G. S. Daehn and G. González Doncel, Metallurgical Transactions, 20, pp. 2289-2355, (1989).
"The Mechanism of Thermal Cycling Enhanced Deformation in Whisker-Reinforced Composites", G. S. Daehn and T. Oyama, Scripta Metallurgica, 22 (7)  pp. 1097-1102, (1988).
 Other Topics:
“TEM Sample Preparation Method for Grain Boundary Phse Identification in Al-Mg alloys” G.S. Daehn and K.A. Unocic, Adv Mat Proc, 166, pp. 42-43, (2008).
“Material Constitutive Parameter Identification Using an Electromagnetic Ring Expansion Experiment Coupled with LS-DYNA and LS-OPT” I. Henchi et. al. in 10th International LS-DYNA Users Conference, accepted (2008).
“Fatigue limits and SEM/TEM observations of fracture characteristics for three Pd-Ag dental casting alloys” D. F. Li et. al, J Mat Science-Mat in Med, 18, 119-125, (2007).
“Vickers hardness investigation of work-hardening in used NiTi rotary instruments”, S. B. Alapati et al., Journal of Endodontics, 32, pp. 1191-1193, (2006).
“Transient Plastic Flow at Nominally Fixed Structure Due to Load Redistribution” W. Gan, P. Zhang, R.H. Wagoner and G.S. Daehn, Zietschrift für Metallkunde, (2005), accepted, revised and awaiting publication.
“SEM observations of nickel-titanium rotary endodontic instruments that fractured during clinical use”, S. B. Alapati et al., Journal of Endodontics, 31, pp. 40-43, (2005).
“Bending fatigue study of nickel-titanium gates glidden drills” N.H. Luebke et al., Journal of Endodontics, 31, pp 523-525, (2005).
“ Proposed Role of Embedded Dentin Chips for the Clinical Failure of Nickel-Titanium Rotary Instruments” S.B. Alapati, W.A. Brantley, T.A. Svec, J.M. Powers, J.M. Nusstein, G.S. Daehn, Journal of Endodontics, 30, 339-341 (2004).
"An Initial Study of Diffusion Bonds Between Superplastic Ti-6Al-4V for Implant Dentistry Applications", K. Elias, G.S. Daehn, W.A. Brantley, E.A. McGlumphy, Proceedings from 82nd IARD, Honolulu, Hawaii, March (2004).
"Fatigue Studies of High-Palladium Dental Castings Alloys:  Part 1.  Fatigue Limits and Fracture Characteristics" D. Li, W.A. Brantley, J.C. Mitchell, G.S. Daehn, P. Monaghan, E. Papazoglou, Journal of Materials Science-Materials in Medicine, 13(4): 361-367 (2002).
"Optimum Trace Copper Levels for SCC Resistance in a Zn-Modified Al-5083 Alloy" M.C. Carroll, R.G. Buchheit, G.S. Daehn and M.J. Mills, Aluminum Alloys 2002: Their Physical and Mechanical Properties Pts 1-3, Materials Science Forum, 396-4: 1443-1448, (2002).
"Optimum Trace Copper Levels for SCC Resistance in a Zn-Modified Al-5083 Alloy" M.C. Carroll, R.G. Buchheit, G.S. Daehn and M.J. Mills, submitted to 8th International Conference on Aluminum Alloys, Cambridge, UK, July 2-5, (2002).
"Fatigue Studies of High-Palladium Dental Casting Alloys: Part I. Fatigue Limits and Fracture Characteristics", D. Li, W.A. Brantley, J.C. Mitchell, G.S. Daehn, P. Monaghan and E. Papazoglou, J Mater Sci: Mater Med, 13, 361-367, (2002).
"Effects of Minor Cu Additions on a Zn Modified 5083 Alloy" M.C. Carroll, P.I. Gouma, G.S. Daehn and M.J. Mills, Mat. Sci & Eng. A, 319-321, 425-428, (2001).
"Effects of Zn additions on the grain boundary precipitation and corrosion of Al-5083", Carroll MC, Gouma PI, Mills MJ, et al. Scripta Mater,42, 335-340 (2000).
"Laboratory Exercises with Bicycles for an Integrated Freshman Engineering Course", M. E. Walter and G. S. Daehn, Submitted to J. of Engineering Education, September 1999.
"Effects of Minor Sc and Zr Additions on Commercial Al-Mg-Mn Alloys, M.C. Carroll, M. J. Mills G. S. Daehn, P. I. Gouma, M. F. Savage and B. R. Dunbar, In TMS Proceedings: Aluminum Alloys for Automotive Applications, S. Das, Ed., TMS, San Diego, Feb. 1999.
"Alligatoring and Damage in the Cold Rolling of Spheroidized Steels", L. Xu and G. S. Daehn, Metallurgical Transactions, 25A, 589-98 (1994).
Modeling the Deformation of Crystalline Solids, Physical Theory, Application and Experimental Comparisons, T. C. Lowe, P. Follansbee, T. Rollett, and G. S Daehn eds., New Orleans, 1991. (proceedings editor).

Patents

"Electromagnetic actuator, method of use and article made therefrom", G. S. Daehn, V. J. Vohnout and A. Tamhane, U. S. Patent 5,860,306, Issued January 19, 1999.
"Hybrid matched tool-electromagnetic forming apparatus incorporating electromagnetic actuator", G. S. Daehn, V. J. Vohnout, L. DuBois, U.S. Patent 6,047,582, Issued April 11, 2000.
"Hybrid matched tool-electromagnetic forming apparatus", G. S. Daehn, V. J. Vohnout and L. DuBois, U. S. Patent 6,050,120, Issued April 18, 2000.
"Hybrid methods of forming using electromagnetic forming", G. S. Daehn and V. J. Vohnout, U.S. Patent 6,050,121, Issued April 18, 2000.
"Hybrid matched tool forming methods", G. S. Daehn, V. J. Vohnout and E. A. Herman, U. S. Patent 6,085, 562, Issued July 11, 2000.
"Hybrid Matched Tool-Hydraulic Forming Methods", G. S. Daehn and V. J. Vohnout, U.S. Patent 6,227,023, Issued May 8, 2001.
"High Velocity Forming of Local Features Using a Projectile", G.S. Daehn, US Patent 6,807,717, Issued October 26, 2004.